Description

Wood anchor bolts are suitable as an add-on to VINdustry wine pegs so they can be mounted from the front side of a wood surface. Please note that your wood material should be a minimum of 3/4″ thick plywood or high density MDF for a secure installation. Particle board may not be strong enough to support this hardware.

NOTE: Orders for this hardware will only be accepted in conjunction with VINdustry wine pegs. Orders for this item only will be cancelled.

When ordering wood anchor bolts, they will replace the standard bolts supplied with VINdustry wine pegs – you will not receive both types of mounting hardware.

Please note that bolts are sold in pairs to match up with sets of pegs. For example, if you are ordering 10 sets of VINdustry pegs, you need to purchase 10 pairs of bolts.

Wood anchor bolts come in 3 different lengths to address a variety of installation scenarios:

40mm anchor bolts – choose these if you are mounting directly to wood material, without any cladding on top.

50mm anchor bolts – choose these if your plywood or MDF substrate material is clad with up to 10mm of other material you must drill through first (eg. 10mm acrylic material on top of plywood backing).

70mm anchor bolts – choose these if your plywood or MDF substrate material is clad with a thicker material, up to 30mm, you must drill through first (eg. 30mm of tile on top of plywood backing).